The self-propelled motorcycle.

The self-propelled motorcycle.

We are constantly thinking about how we can make motorcycling even safer. Automation is part of your motorcycle safety. The self-propelled motorcycle is a prototype that we presented to the general public at the Consumer Electronic Show 2019 (CES) in Las Vegas - the fair that provides an outlook on the upcoming technology trends. However, we are not forcing autonomous driving as such with this test vehicle: we use the prototype to measure and collect data in order to further develop vehicle dynamics control systems. The aim is for dynamic control programs to detect dangerous situations at an early stage and thus support the rider, for example, at intersections, when turning off or when braking quickly.

+ Read more

Digitally networked for more comfort and security.

Digitally networked for more comfort and security.

BMW Motorrad is working hard to ensure that motorcycles are not forgotten in the mobility of the future. The main focus here is on communication between vehicles (V2V communication) via digital networking. In this respect, BMW Motorrad is currently researching intelligent rider assistance systems that should lead to greater safety in road traffic and greater comfort for motorcyclists. For example, an Intersection Movement Assist:  The car receives a warning signal when approaching a junction if it is on a collision course with a motorcycle. Another electronic helper could be Emergency Electronic Brake Lights: If a motorcycle suddenly has to brake hard, behind which, for example, a bus or van is driving and thus obstructs the view of following cars, those vehicles receive a warning. Also under development is Stationary Vehicle Warning: If a motorcycle breaks down, a car can receive a warning signal in good time and adapt its driving behavior at an early stage.

+ Read more

Additive Manufacturing.

Additive Manufacturing.

Additive manufacturing is still in its infancy. However, it is already clear to us that the potential is enormous. Parts made from a 3D printer play a particularly important role in the creation of prototypes. And even today, some components and spare parts can be produced for you quickly and cost-effectively – without long waiting times. The goals are also the mass individualization of selectable and configurable parts. So that you can make your vehicle even more personal. The question of which parts will go into series production in the future is exciting. Because with a with a holder for the roof cover of the BMW i8 Roadster, series production has already entered for the first time using a 3D printing process. Our current research and development is testing the further potential of this production technology – as the potential frame and swingarm of a BMW S 1000 R show.

+ Read more

Ultimate tests for carbon.

Ultimate tests for carbon.

Since the introduction of the BMW HP4 RACE, it has become clear that series production of carbon is possible and has reached the benchmark in lightweight construction. However, the advantages are not only the lower weight of the carbon fibre compared to conventional materials – the frame in particular impresses with its transverse, bending and torsional stiffness. The low gyroscopic forces are a plus for the wheels. As the production of carbon is becoming ever faster and cheaper, you can be curious to see which parts will be used in BMW Motorrad's production vehicles in the future. Until they are ready for series production, complex hardness tests and endurance tests are carried out. In the curb test of the carbon wheels, our developers forced damage and proved that further riding with the motorcycle is still possible. On the test bench, the testers simulated the action of various forces, gave the carbon wheels a radial impact or imitated wheelies. Salt spray and climate change tests were just as much a part of the test series as the brake test under particularly high heat development. We test all extreme situations and conceivable scenarios, so that we leave nothing to chance.

+ Read more

CONCEPT LINK.

CONCEPT LINK.

Intelligent networking of human, vehicle, rider clothing and the environment allows you the highest degree of freedom. The Concept Link concept study creates a seamless crossover of the digital and analogue worlds – for a convenient mobility experience in the urban environment of the future.

+ Read more

LASER LIGHT.

LASER LIGHT.

With the fog light laser light, you never lose sight of your destination. The extremely high range allows you to perceive potential hazards 11 seconds sooner than with conventional headlights at speeds of 100 km/h.

+ Read more

Current Innovations

THE NEW BMW R 1250 GS.

THE NEW BMW R 1250 GS.

With the new BMW R 1250 GS, you can now experience the new Boxer even more directly. With impressive power, the new GS takes you into the next adventure: the increase in displacement to 1250 ccm and 136 hp brings you more performance - the maximum torque is 143 Nm. At lower revs the drive is noticeably smoother and runs completely jerk-free. The reason for this is the variable camshaft control BMW ShiftCam, the heart and technological innovation of the newly developed boxer engine. At the same time, we have reduced emissions and fuel consumption. Whether in the city, on the country road, on the motorway or off-road: New styles and colours, numerous technical details and exciting equipment options emphasise the character of the new BMW R 1250 GS.

+ Read more

CONNECTIVITY - TFT-DISPLAY AND BMW MOTORRAD CONNECTED APP.

CONNECTIVITY - TFT-DISPLAY AND BMW MOTORRAD CONNECTED APP.

 

With the Connectivity optional equipment you'll be fully connected and always have access to the information you need. The combination of a 6.5" TFT display and multi-controller on the handlebars allows you to intuitively control your features. Whether you want to easily navigate your way through the city via arrow navigation with the BMW Motorrad Connected App, make a phone call while riding or listen to the perfect song – thanks to Connectivity, you can keep your concentration on the road and have an overview of all the important information. The newly designed and updated app offers many optimized features and is perfectly suited for motorcycle navigation: With the "Windy Route" route option – and further interesting choices – you will experience the ultimate experience on your motorcycle. 

+ Read more

CARBON CHASSIS & RIMS.

CARBON CHASSIS & RIMS.

The best qualities of carbon are: its superiority. You’re able to take every bend faster, to accelerate quicker and brake later. For the first time, BMW Motorrad is uncompromisingly using carbon chassis and rims (carbon technology) for the HP4 RACE.With the rigidity of aluminium and the strength of steel it sets new standards in the whole vehicle manufacturing.

+ Read more

ECALL. THE INTELLIGENT EMERGENCY CALL.

ECALL. THE INTELLIGENT EMERGENCY CALL.

ECALL provides swift and reliable assistance right when you need it. The intelligent emergency call is always by your side and speaking your language whilst providing assistance in the case of accidents and emergency situations.

+ Read more

SIDE VIEW ASSIST.

SIDE VIEW ASSIST.

With the side view assist optional equipment, you have everything under control – even the things you can't see.

+ Read more

ABS PRO.

ABS PRO.

ABS Pro makes every corner an entirely pleasurable riding experience: ABS Pro allows for safer deceleration in emergencies. The tendency of the bike to return to an upright position from a tilted one is reduced to a minimum. Meaning the motorcycle remains under control even during abrupt braking manoeuvres in bends.

+ Read more

Milestones.

The most important innovations.

The most important innovations.

Safety 360°

Safety requires action. Not words.

Safety requires action. Not words.

More stories you might be interested in.

spinner